Hospital Sterilization Supply Center Instrument Procurement: Avoid the Pitfall! Don't Buy the

In the hospital sterilization supply center (hereinafter referred to as the "sterilization supply center"), residual chlorine detection is the "lifeline for sterilization safety". Just think about it. If the residual chlorine concentration in the water used for cleaning and disinfecting medical instruments fails to meet the standard, the sterilization of the instruments may fail. When patients use these instruments, the risk of cross - infection will increase significantly, and the consequences could be disastrous. The sterilization supply center usually needs to conduct detections at scattered points such as cleaning tanks and rinsing pools. However, many hospitals have been deceived by the promotion of "multi - point integrated monitoring" and bought instruments that are neither suitable nor expensive. Next, the chlorine sensor Manufacturer, Maideshi, will explain it in detail for you!

 Problems with the "Multi - Point Integrated Monitor"

This type of instrument requires complex wiring to be laid in advance to collect signals from multiple points to the main unit. However, the equipment layout in the sterilization supply center is often adjusted. For example, when a new cleaning station is added, the previously laid wiring may become useless, and the whole wiring process has to be redone. Moreover, the integrated model has a major flaw, which is the "all - stop when one fails" problem. If the sensor at one point malfunctions, the entire instrument will stop working. It's like having a jumpsuit but wanting to wash it piece by piece, which is really inconvenient. During the maintenance period, the detection at all points has to be interrupted, which seriously affects the work efficiency of the sterilization supply center.

 Advantages of Single - Point Sensors

Considering the actual situation of the sterilization supply center, more than 90% of the residual chlorine detection points (2 - 5 points) in the sterilization supply center are scattered in different operation areas. The single - point automatic residual chlorine sensor does not require wiring. It supports wireless transmission or independent power supply and can be flexibly moved as the workstations are adjusted. If a single sensor malfunctions, only the corresponding device needs to be replaced, which is the so - called "replace one when one fails". The maintenance cost is also very low. The maintenance cost of a single - point sensor is 60% lower than that of the overall maintenance of the integrated model, fully meeting the needs of decentralized detection in the sterilization supply center.

  Cost Calculation

Comparing the prices of mainstream products on the market, a 4 - point integrated residual chlorine monitor costs about $35,000, while the total price of 4 single - point sensors is only $24,500, with a price difference of 30%. If an additional detection point is needed later, the integrated model requires an additional upgrade fee of $5,000, while for the single - point sensor, only one more sensor needs to be purchased, which costs about $6,000. In the long - term use, the single - point sensor has a lower cost and is more in line with the hospital's need to control expenses.

Therefore, when the sterilization supply center selects a residual chlorine monitor, it should first choose single - point sensors according to the number of detection points instead of blindly pursuing "integration and convenience". Special attention should be paid to the detection accuracy of the sensor. In the range of 0.01 - 10mg/L, the error should be less than or equal to ±2% to meet the hospital's disinfection standards. The real - time data upload function that can be connected to the hospital's infection control system should also be considered. Don't pay for those inflexible integrated functions anymore. This way, it can not only ensure the hospital's disinfection safety but also control costs. Why not do it? If you also want to choose a suitable online residual chlorine detector and avoid being deceived, welcome to consult the chlorine sensor Manufacturer, Maideshi, at any time!

In conclusion, when it comes to purchasing residual chlorine monitors for hospital sterilization supply centers, single - point Digital residual chlorine sensors are a more cost - effective and practical choice. They offer flexibility, lower costs, and meet the necessary detection requirements. By making a wise choice, hospitals can ensure the safety of their sterilization processes while keeping their budgets in check. If you have any questions about choosing the right online residual chlorine detector, feel free to reach out to Maideshi, a reliable chlorine sensor Manufacturer.